Products List
Ring rolling machine
CMICO ring rolling machines are used where the diameter of the blanks needs to be increased in order to produce rings.
For this the blanks are heated to forging temperature and their wall thickness reduced during radial ring rolling by a main roll and a mandrel roll.
For radial-axial ring rolling, two axial rolls reduce the height of the blanks...
Rail bound forging manipulator
MANIPULATOR SPECIFICATIONS
CARRYING CAPACITY, NOMINAL: 80 TONS
TONGS CLAMPING MOMENT: 2,000 KNM
TONGS OPENINGS, WITHOUT INSERTS, ROUND: 800/2,000 MM ROUND
WITH INSERTS: 200 - 800 MM ROUND
WITH EXTENSION ARMS: 100 - 2,800 MM ROUND
MAX. TURNING DIAMETER WITH EXTENSION ARMS: 3,900 MM
VERTICAL TILTING ANGLE OF TONG: UP 15 ANGLE (DOWN TO...
Radial forging machine
CMICO SX radial forging machines are used for cogging large ingots, and for the production of long bars of round, square or rectangular cross sections, tapered or stepped shafts. CMICO offer customer specific machines with manipulators and all required automation equipment.
The new generation radial forging machines type RF combine the...
Hot forging press
NOMINAL PRESS FORCE: 1600-6300KN
CASTING FRAME
BLOW ENERGY: 10-1650KJ
X SHAPE GUIDE
EJECTION TYPE: PNEUMATIC AND HYDRAULIC
HIGH ENERGY SAVING
PLC CONTROLLED
COMBINED WITH ROBOT INTO AND AUTOMATIC FORGING...
Cold forging press
NOMINAL PRESS FORCE: 5000-30000KN
STRAIGHT SIDE FRAME
WORKING STATION: 1-6
UPPER EJECTION: 1-6
LOWER EJECTION: 1-6
THE PRESS IS PROFESSIONAL IN PRODUCING THE PARTS FOR AUTOMOBILE SUCH AS...
Open die forging press, with two columns
The open-die forging presses, with two columns, are built for small and medium press capacities.
Two-column presses offer better visibility of the forging area.
The two-column design makes them easy to ensure the equal and uniform distribution of load between two columns. The rectangular column sections are advantageous in withstanding eccentric...
Open die forging press, with four columns
5,000 TON HEAVY 4-COLUMN PUSH-DOWN HYDRAULIC OPEN DIE FORGING PRESS WITH 80 TON FORGING MANIPULATOR
PRESS SPECIFICATIONS
PRESS FORCE: 400.0 BAR (4,700 TONS)
UPSET FORCE: 425.0 BAR (5,000 TONS)
MAXIMUM PRESS STROKE: 2,500.00 MM
MAIN CYLINDER DIAMETER: 710.0 MM
NO. OF CYLINDERS: 3 SET
PRESS DAYLIGHT: 5,000.0 MM
PRESS FORCE STAGE @ 425...
Page 1 Of 1 1